The Actineb Medix Nebuliser System is ideal for home and clinic use, and is suitable for patients of all ages
Actineb Medix Nebuliser System is easy to use, yet powerful enough to nebulise all commonly prescribed medications for chronic chest conditions.
Actineb Medix Nebuliser System is designed to deliver a fine aerosol mist (from the liquid medication prescribed by your doctor) to treat your respiratory condition. Use this nebuliser only according to the instructions given by your doctor or physician. Please read the instructions carefully, to obtain the maximum benefit from this nebuliser system and to ensure its safe use.
Actineb Medix Nebuliser System features a discreet storage compartment, that allows for accessories and power lead to be neatly stored - meaning that the Actineb Medix Nebuliser System does not take up much space.
Actineb Medix Nebuliser System is supplied with a kit consisting of:
1 x nebuliser chamber
1 x adult face mask
1 x driveline
1 x inlet filter disc
Operating Instructions:
1. Connect mains plug to mains power supply.
2. Connect driveline to outlet nozzle.
3. Connect nebuliser chamber, followed by face mask or mouthpiece (optional extra), to the driveline. (see below)
4. Press mains switch on. The equipment will now operate.
Actineb Medix Nebuliser System is suitable for mains AC operation only.
Please Note: Actineb Medix Nebuliser System is fitted with a thermal cut-out system, to protect the equipment. It can be used for continuous treatment up to 1 hour. Do not re-use within 1 hour.
Filling the Nebuliser Chamber (for Single Patient Use):
1. Connect one end of the driveline to the outlet nozzle on your compressor.
2. Connect the other end of the driveline to the bottom of the nebuliser cup.
3. Remove the nebuliser chamber top from the cup and pour medication into the cup (max 10ml.)
4. Screw the top back onto the cup.
5. Connect either the face mask or mouthpiece to the nebuliser top.
Actineb Medix Nebuliser System - Administering the Medication:
Switch the compressor unit on. Sitting in an upright relaxed position, place face mask over the nose and mouth or mouthpiece into the mouth, and start breathing slowly and deeply. Do not try to breathe quickly. If you have any problems, seek instruction from your physician. Switch off the compressor when the misting has stopped. Unplug the mains lead.
Actineb Medix Nebuliser System - Cautions for Use
1. Actineb Medix Nebuliser System is to be used only when advised or prescribed by your GP.
2. Never use more frequently than prescribed.
3. If therapy is having no effect, consult your GP. Do not discontinue use until your GP advsises this.
Actineb Medix Nebuliser System - Safety Precautions:
Always disconnect from electricity supply before undertaking any maintenance or cleaning.
Never operate the unit where it may come into contact with water. Should this happen, switch off at mains and unplug immediately.
Never block air intake grills on the side of the device.
Always keep electrical leads clear of heated surfaces.
Position the unit on a clean surface. Do not place on carpet, where fibres can be drawn into the unit when in use.
Avoid using in a room where people smoke.
Store in a clean dry dust free environment at room temperature.
Not suitable for use with flammable anaesthetic gases.
Do not modify the equipment or its accessories in any way.
Do not immerse in water.
Actineb Medix Nebuliser System - Technical Description:
Model 3604700/3604701
Region UK/EU
Rated voltage 230V
Frequency 50Hz
Power Consumption 140W
Fuse T1.6 Amp (20 x5)
Nominal Flow 7.0L/min @ 100 kPa with Microneb III
Weight 2.3 Kg
Dimensions (mm) 282 x 200 x 125
Classification Class II, Type BF Intermittent (60/60)
